Our Raised Ultimate 5th Wheel Connection (Part #: 3217) is intended to be a solution to truck and 5th wheel setups where the side rails and tailgate don’t allow enough clearance on our standard Ultimate 5th Wheel Connection (Part #: 3220). Before considering the Raised Ultimate Connection (Part #: 3217), we recommend looking into the standard Ultimate Connection (Part #: 3220).

Will it work for my setup?

If you are considering the Raised Ultimate Connection, we suggest reviewing the following information:

• Typically the Raised Ultimate Connection (3217) is only recommended for trucks with higher side rails. Using the Raised Ultimate Connection when it isn’t necessary may add excessive leverage on the truck bed and excessive height.

• Make sure your 5th wheel trailer will be level when hooked up to the Raised Ultimate Connection. Along with the height of your truck and trailer set up, you will need to take into account the height of the Ultimate Connection, so that your 5th wheel trailer is level. If not, then you could be putting unnecessary stress on the back axles of your 5th wheel.

• Review our 5th Wheel Configuration Chart for setup compatibility.

• Measure for proper turning and tailgate clearance, by completing the following measurements on Section 1 and 3 of the Ultimate Connection Installation Manual. If you will have sufficient clearance with the standard Ultimate Connection (Part #: 3220), then we recommend using the 3220 instead of the 3217.

If you have additional questions or would like more clarification, contact our customer service department either by email at customerservice@anderseninc.com or by phone at 208.523.6460.

What are the Pros & Cons?

CONS

• If your 5th wheel is not level, this adds excess stress and weight on the back axles

• Sits above truck bed rails, so you cannot use your truck bed cover with the hitch installed.

PROS

• Allows for greater turning and tailgate clearance on newer models of trucks (2020 and newer)

• Potential solution for clearance in short bed trucks